====== Quick start for install Miko PBX ======

This manual will help you to get the MikoPBX up and running as quickly as possible. Follow the instructions step-by-step in the order in which they are presented.

<note>The content of the full documentation for Miko PBX is available [[en:|here]].</note>

===== Step 1. Miko PBX installation =====

<note important>
**Pay attention!**\\ 
Before the Miko PBX installation surely study system requirements!
</note>

** Miko PBX** - the full **operating system** for your equipment, is not the separate program. It is delivered in the form of an image (*.iso, *.img).\\ 

Several options of the MikoPBX installation are possible. Select for yourself the most suitable option of installation:\\ 
  * The Miko PBX installation with **a CD disk ** on separately dedicated server. The PC should support loading with CD. [[setup#live_cd|Installation instructions]].\\ \\ 
  * The Miko PBX installation with **USB** on separately dedicated server. The PC should support loading with USB.[[setup#live_usb_bootable_usb|Installation instructions]].\\ \\ 
  * Start of Miko PBX with **a boot USB disk**. When loading with USB all changes in a configuration work before the first reset. The PC should support loading with USB. [[setup#live_usb_bootable_usb|Installation instructions]].\\ \\ 
  * The Miko PBX installation on **the virtual machine**. [[setup#виртуальные_машины|Installation instructions]].\\ \\  

===== Step 2. Connection of a disk for storage =====

After the Miko PBX installation be convinced that you connected a disk for storage of records of a talk.
For this purpose we will perform the following operations:
  * Enter from the keyboard digit ** 6 ** and click "** Enter **" to start installation.\\ {{ :en:2019-01-28_174450.png |}}\\ \\ 
  * Enter the name of a disk for connection (for our example, sdb) and click ** Enter **.\\ 

Disks **more than 1024 MB** in size will be included in the selection list for **Storage**.\\ 
**Pay attention!** The system disk ** on which Miko (in our example the disk sda) is set only ** if it  the size exceeds ** 600 MB ** can act as a disk for storage of records of a talk. Otherwise to connect a system disk for storage of records of a talk it will not turn out. \\ \\  


The disk is successfully connected! At repeated attempt to connect a disk for storage of records of a talk the notification that the disk is already mounted will be output.\\ 
{{ :en:2019-01-28_174535.png |}}\\ 

===== Step 3. The first start of Miko PBX! =====

After the successful Miko PBX installation it is necessary to pass to its settings in ** the web interface **. Follow [[to welcome | to instructions]] for implementation of the first start of Miko PBX in the web interface.

===== Step 4. Setup of the network interface =====

For stable work of Miko PBX it is necessary to configure ** network ** through the section ** Network and Firewall **-> ** Network interfaces **.\\ 
Perform setup according to the [[en:network|instruction]]. 

===== Step 5. Licensing setup =====

To work with Miko PBX, it is necessary to make settings in the system of licensing. Without license work of Miko PBX is impossible.\\ 
Perform setup according to the [[en:licensing|instruction]]. 

===== Step 6. Setup of the network screen =====

In Miko PBX all local subnets it is possible to describe in the section ** Network and Firewall **-> ** the Network screen **. The network screen is intended for access restriction to the station as traffic and to subnets.\\ 
Perform setup according to the [[en:firewall|instruction]]. 

===== Step 7. Fail2ban setup =====

Fail2ban blocks the IP addresses with non-standard activity, it is capable to reduce the speed of unsuccessful attempts of authentication, allows to protect your Miko PBX from cracking.\\ 
Perform setup according to the [[fail2-ban|instruction]]. 

===== Step 8. Setup of accounts of employees =====

At this stage we create accounts for extensions of employees. Follow [[extensions|to these instructions]] for creation of the list of extensions.

===== Step 9. Connection of providers =====

For connection of provider in Miko PBX follow [[en:providers|instructions]]. 

===== Step 10. Routing setup =====

At this stage it is necessary to set rules of routing of the entering and outgoing calls as the calls going through a certain provider will be processed.\\ \\ 
  * [[incoming-routes|Routing of incoming calls]]
  * [[outbound-routes|Routing of outgoing calls]]

You can be necessary for creation of rules of routing:\\ 
  * [[call-queues|Call queues]]
  * [[ivr-menu|IVR menu]]
  * [[conference-rooms|Conferences]]

On it the main Miko PBX setup is complete! For deeper studying of opportunities of Miko PBX we recommend to address [[en:|documentation]].